Filter
Top Products
22
Configuration Menu Functions
TW500_English
"Reset" menu
This sets whether the start-up screen (the image that is projected when projection starts)
is displayed (ON) or not displayed (OFF).
If you change the setting, the new setting will take effect after the power has been
turned off and the cool-down
period is complete.
ON
Sets the signal format in accordance with the video equipment that is connected to the
[Video] or [S-Video] port. If set to "Auto", the video signal format is set automatically.
If there is a lot of interference in the image, or if a problem such as no image being
projected occurs even though "Auto" has been selected, select the correct signal format
manually.
Auto
Sets the signal format in accordance with the video equipment that is connected to the
[InputA] or [InputB] port or the signal being output from a computer. If a component
video source is connected, the video signal format is set automatically when
"Component(Auto)" is selected. If "Component(Auto)" is selected and the colours
appear unnatural, select the appropriate signal.
Component(Auto)
This sets the signal format in accordance with the signals being output from video
equipment that is connected to the [D4] port. If set to "Auto", the setting is made
automatically. If "Auto" is selected and the colours appear unnatural, select the
appropriate signal.
Auto
This sets the display language for messages and menus.
English
(Varies depending on
country of purchase)
This resets all "Setting" menu settings to their default settings except for the "Network", "User’s Logo", "Input
Signal" and "Language" settings.
This initialises the lamp operating time. When this command is selected, the cumulative operating time for the
lamp is cleared and returned to the default setting.
This resets (erases) all settings that have been saved in the "Memory: Standard" and "Memory: Advance"
commands.
Startup Screen
Default setting
Input Signal
Video Signal
Input AInput A Input B
D4
Default setting
Language
Reset
Lamp-Hours Reset
Memory Reset
TW500-E.book Page 22 Wednesday, October 29, 2003 8:52 PM