Filter
Top Products
25
Preparation for Using Cinema Color Editor
Adjusting projected images using a computer
TW500_English
Uninstalling Cinema Color Editor
If you no longer require Cinema Color Editor, uninstall it by following the procedure below.
Connecting to a Computer
In order to use the Cinema Color Editor to adjust picture quality, connect the projector and the
computer using a USB cable, an RS-232C cable or a network cable.
Connection using a network cable
The projector can be connected to a network using a commercially-available 100baseTX or
10baseT network cable. You must use a Category 5 shielded twisted-pair cable to connect the
network to prevent malfunction.
Windows
From My Computer, open the Control Panel,
double-click "Add or Remove Programs",
select "Cinema Color Editor", and then click
Add/Remove] (or [Change/Remove] for
Windows XP).
Macintosh
Follow the instructions that are displayed
on the screen until the following window is
displayed.
Select Uninstall.
Click [Uninstall].
To network port
Network cable
(commercially-available)
To [Network] port
TW500-E.book Page 25 Wednesday, October 29, 2003 8:52 PM