Filter
Top Products
6
Part names and Functions
TW500_English
Rear
Base
•
••
•
[D4] port
Setup Guide
Connects to the component video
(YCbCr
or YPbPr ) ports or D
port of other video equipment.
(Japan only)
•
••
•
[InputA]/[Input B] ports
Setup Guide
Connects to the component video (YCbCr or
YPbPr ) ports or RGB ports of other video
equipment or to a computer's video output port.
•
••
•
[S-Video] port
Setup Guide
Inputs an S-Video signal to the projector
from other video equipment.
•
••
•
[Control (RS-232C)] port p.26
Connects the projector to a computer using an RS-232C
cable when using the Cinema Color Editor.
•
••
•
[USB] port p.26
Connects the projector to a computer
using a USB cable when using the
Cinema Color Editor.
•
••
•
Remote control light-
receiving area
Setup Guide
Receives signals from the
remote control.
•
••
•
[Video] port
Setup Guide
Connects to general video ports of
other video equipment.
•
••
•
[Trigger out] port p.20
When the projector power is turned on, a 12 V DC
signal is output from this port. When the projector's
power is turned off or a problem with operation occurs,
the output becomes 0 V to send the projector's power
ON/OFF status to an external device.
•
••
•
Power inlet
Setup Guide
Connects the power cable.
•
••
•
Security lock ( ) p.49
•
••
•
[HDMI ] port
Setup Guide
Connects to video equipment or a
computer that is HDMI-
compatible.
•
••
•
[Network] port p.25
Connects the projector to a
network.
•
••
•
Suspension bracket fixing points (4 points)
p.44
Attach the optional ceiling mount here when suspending
the projector from a ceiling.
•
••
•
Air filter (air inlet) p.40, p.42
Prevents dust and other foreign
particles from being drawn into the
projector. It should be cleaned
periodically.
TW500-E.book Page 6 Wednesday, October 29, 2003 8:52 PM