Filter
Top Products
4
TW500_English
Part names and Functions
Front/Top
Control Panel
The area around the control panel buttons and characters light when the projector's power is turned on.
If the "Button Illumination" configuration menu command is set to "OFF", they will not light. p.21
•
••
•
Front adjustable feet
Setup Guide
Extend to adjust the projection angle so that
the projector is horizontal when placed on a
desk top.
•
••
•
Control panel See below
•
••
•
Lamp cover p.42
Open this cover when
replacing the lamp inside.
•
••
•
Air exhaust vent
•
••
•
Remote control light-receiving
area
Setup Guide
Receives signals from the remote control.
•
••
•
Vertical lens adjustment dial
Setup Guide
Moves the lens vertically.
•
••
•
Horizontal lens adjustment dial
Setup Guide
Moves the lens horizontally.
•
••
•
Lens cover
Attach when not using the projector
to prevent the lens from becoming
dirty or damaged.
•
••
•
Focus button
Setup Guide
Press to adjust the focus of the projection lens.
•
••
•
(Lamp) indicator p.32
Lights or flashes in different colours to
indicate problems with the projection lamp.
•
••
•
(temperature) indicator p.32
Lights or flashes in different colours to
indicate problems with the projector's
internal temperature.
•
••
•
Power button
Setup Guide
Press to turn the power
on and off.
•
••
•
Zoom button
Setup Guide
Press to adjust the size of
projected images.
•
••
•
Select button p.8, p.10, p.12, p.23
Displays the line menu.
When viewing a configuration menu or selection menu, press this
button to select the menu item and proceed to the next display.
•
••
•
buttons p.23,
Setup Guide
Press to select
configuration menus or to
adjust the focus and zoom.
•
••
•
/ / buttons
p.8, p.10, p.12, p.23,
Setup Guide
Used as up/down buttons to select items in
configuration menus and select menus.
If the above menus are not displayed,
corrects the keystone distortion.
•
••
•
Menu button p.23
The full-screen configuration menus turn on
and off each time the [Menu] button is pressed.
•
••
•
Aspect button p.8
Displays a selection menu for
selecting the aspect.
•
••
•
Esc button p.23
Pressing [Esc] while viewing a configuration menu
or selection menu displays the previous menu.
•
••
•
(Operation) indicator
p.32
Flashes or lights in different
colours to indicate the operating
status of the projector.
•
••
•
Source button
Setup Guide
Displays a selection menu for
selecting the image source.
TW500-E.book Page 4 Wednesday, October 29, 2003 8:52 PM