Filter
Top Products
39
Problem Solving
Troubleshooting
TW500_English
Problems with network connections
Projector cannot be recognized
Are the projector and the
computer correctly connected
to the network?
Connect the network cable correctly.
Has the projector been set up
correctly for connection to the
network?
Check the settings for the "Network" menu command.
"Setting"-"Operation" - "Network" p.20, p.27
Is "Network Monitoring" set to
"ON"?
To turn the projector's power on from a computer while the projector is
in the standby mode, you must first set "Network Monitoring" to "ON".
"Setting"-"Operation" - "Network Monitoring" p.20
Is power being supplied to the
projector?
Check if the power supply to the location has been interrupted, or if the
circuit breaker for the electrical outlet has been tripped.
TW500-E.book Page 39 Wednesday, October 29, 2003 8:52 PM