Filter
Top Products
The BarCode setting converts bit images to bar codes by
automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. BarCode is not available in I239X mode.
This mode reduces the size of the image being printed and may
cause some distortion when printing bit-image graphics.
ZeroChar
This option determines whether the printer prints a slashed
zero (0) or an unslashed zero (0). This feature is useful for
clearly distinguishing between an uppercase letter O and zero
when printing documents such as program lists.
The table below shows the available parameters for each setting
in ESC/P 2 and FX modes. See the previous pages for a
detailed description of each setting.
Setting Parameter
Font Courier, Prestige, Roman, Sans serif,
Roman T*, Orator S, Sans H*, Script, OCR B
Pitch 10 cpi, 12 cpi, 15 cpi, Prop.
Condensed Off, On
T. Margin 0.40 - 1.50 inch
Text 1 - 81 Lines
CG Table PcUSA, Italic, PcMultilin, PcPortugue,
PcCanFrenc, PcNordic, PcTurkish2,
PcE. Europe, BpBRASII, BpAbicomp
Country USA, France, Germany, UK, Denmark, Sweden,
Italy, Spain1, Japan, Norway, Denmark2,
Spain2, LatinAmeric, Korea*, Legal*
Auto CR On, Off
Auto LF Off, On
Bit Image Dark, Light, BarCode
ZeroChar 0, 0
*Available only in ESC/P 2 mode.
L
Albatross Rev. c
A5 size Chapter 5
96/08/23 Pass 0, DR
5-26
SelecType