Filter
Top Products
The position of the printout is not correct.
Make sure that you are using the correct page length and
margin settings in your application program.
Graphics don’t print correctly.
Make sure that your software program is set for the printer
emulation you are using. For example, if you are using the LJ4
emulation, be sure that your graphics software is set for a
LaserJet 4 printer.
If you are using a serial interface, make sure that you set the
appropriate protocol settings in the SelecType Serial Menu.
Graphics require large amounts of memory; see “Memory
Problems” in this chapter for more help.
The Remote Control Panel utility does not function as expected.
Your settings may have been changed by your software
program, which overrides the Remote Control Panel utility.
Initialize the printer as described later in this chapter.
SelecType does not function as expected.
Software programs override SelecType settings. Use software
settings instead of SelecType settings whenever possible.
Your settings may have been changed by your software
program. Perform a factory reset (initialize) with the
function in the SelecType Setup Menu. For more
information, see Chapter 5.
L
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
6-8
Troubleshooting and Maintenance