Filter
Top Products
Even with additional memory installed, complex pages don’t print
and the Mem Overflow message still appears.
The
setting in the printer driver, the Remote
Control Panel utility, or SelecType may need to be changed. See
“Memory Problems” in this chapter for more information.
You may not have installed enough memory. If you are
printing at 600 dpi, printing at 300 dpi may solve the problem.
Status and Error Messages
This section contains an alphabetical list of status, error, and
warning messages that appear in the control panel display.
Card Battery Low
The battery of the optional PCMCIA card is low. Change the
battery in the card.
Change Card Battery
The battery of the optional PCMCIA card is used up. Change
the battery in the card.
Check Duplex P-Size
The paper size setting is different from the size loaded in the
printer. Check to see if the correct size of paper is loaded in the
tray. Open the printer cover or Duplex Unit cover, then pull out
the paper and close the cover. The print data is automatically
reprinted.
L
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
6-18
Troubleshooting and Maintenance