Filter
Top Products
8. Secure the Duplex Unit with two screws that came with the
unit.
c
Caution:
Be sure to secure the screws all the way; otherwise the printer
may be damaged.
9. Reconnect any interface cables you removed.
10. Make sure the power is turned off and then plug the power
cord into the printer and into an electrical outlet.
11. Turn on the printer.
To confirm that the Duplex Unit is installed correctly, print a
status sheet. If the unit is not listed on the status sheet, try
reinstalling it.
Note:
Select Duplex On on the Printing Menu in SelecType before using
the Duplex Unit; the default setting is Off.
r3-5
R
Albatross Rev.c
Reference Guide
A5 size Chapter 3
’96/08/23 DR, pass 0
Options
3-11