Filter
Top Products
3. Grasp both sides of the SIMM and pull it out as shown above.
4. Follow steps 9 through 10 in the previous section to complete
the procedure.
ROM Module
You can install the EPSONScript Level 2 module (C83226
✽
)
using the same basic steps as those used to install the memory
module. See “Installing a memory module” for installation
instructions. However, this must be installed in the ROM SLOT
rather than in the RAM SLOT.
Optional Interfaces
This section describes how to install the LocalTalk/Serial
modules and optional Type-B interface cards listed below.
❑
To add a serial or parallel interface to your printer, use one
of the following:
LocalTalk/Serial module C82334
✽
32 KB Serial Interface Card C82307
✽
32 KB Parallel Interface Card C82310
✽
The LocalTalk/Serial module provides your printer with either
an RS-232C or current loop serial connection.
❑
To add a direct connection to an IBM mini or mainframe
system, use one of the following:
Coax Interface Card C82314
✽
Twinax Interface Card C82315
✽
R
Albatross Rev.c
Reference Guide
A5 size Chapter 3
’96/08/23 DR, pass 0
Options
3-21