Filter
Top Products
The printer doesn’t print and the
On Line
light is off.
Press
On Line
once to put the printer on line (the On Line light
comes on).
A font selected with software commands won’t print.
The selected font is not installed in your printer. Be sure you
have installed the correct font. See Appendix D for more
information.
Some or all of the output is garbled.
If you use the Remote Control Panel, check whether any
Remote Control Panel settings have been changed by another
user.
Make sure that both ends of the interface cable are plugged in
securely.
Make sure you use a double-shielded, twisted-pair interface
cable no longer than six feet in length for Parallel B; no longer
than 30 feet in length for Parallel C.
The Image Optimum setting may be set to
Auto
or
On
. If it is,
fonts other than you expect may be printed to increase the
printing speed. Turn the Image Optimum setting off in the
printer driver, the Remote Control Panel utility, or SelecType.
The emulation setting for that port may not be correct. Specify
the emulation mode with the Remote Control Panel utility or
SelecType.
If the printer still does not print correctly, contact your dealer
or a qualified service person.
R
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
Troubleshooting and Maintenance
6-7