Filter
Top Products
Duplex print was off
Turn Duplex mode on in the SelecType menu, then press
Continue
to clear the message. If this doesn’t solve the
problem, one of the conditions below has occured and needs to
be fixed.
1) Paper Size is incorrectly set to CTM, MON, C10, DL, C5, or
C6; set this option to a supported paper size.
2) Paper Type is set to something other than
Normal
; set this to
Normal
.
3) The Duplex Unit is not installed; install the Duplex Unit.
4) The paper size, paper feed, or paper type is different from the
top and bottom.
To clear the error message, (1) press
Continue
or (2) reset the
printer by pressing
ALT
and
Reset
at the same time.
EPL-N2000
When Printer Name is on in the SelecType Setup menu, this
message appears.
Feed Jam
Paper is not feeding into the printer from the specified feeder
(or cassette) or has jammed on its way into the printer. Remove
the jammed paper. See page 6-2 for feed jams in the printer. See
page 6-3 for feed jams in the optional paper cassette. See page
6-5 for advice on preventing this problem.
L
Albatross Rev.c
A5 size Chapter 6
96/08/23 Pass 0, DR
6-20
Troubleshooting and Maintenance