Filter
Top Products
4. Remove the two hooks from the printer.
Note:
Save the hooks, in case you need to install the unit again in the
future.
5. Secure the screw and the cover that you removed earlier
when installing the Duplex Unit in step 4 on page 3-9.
6. Follow steps 9 through 11 in the previous section to complete
the procedure.
PCMCIA Card
Install a PCMCIA card to increase printer memory. You can use
any PCMCIA card that is compatible with the following:
❑
PCMCIA ver. 2.1 compliance
❑
Card Type: SRAM, EEPROM, Flash
❑
Slot Type: Type 1, Type 2
R
Albatross Rev.c
Reference Guide
A5 size Chapter 3
’96/08/23 DR, pass 0
Options
3-13