Filter
Top Products
1
Setting Up the Projector
5
Setting Up the Projector
This chapter tells you how to unpack your projector and set it up for a
presentation. The projector must be connected to a computer or a
video source such as a DVD player, VCR, camcorder, digital camera,
or other video device before it can project images.
To set up the projector, you need to:
■
Unpack and position the projector
■
Connect the projector to one or more input sources
Unpacking the Projector
Make sure you have all the parts shown:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use a carrying case (either an EPSON case or something similar,
such as a laptop case). See page 50 for transportation instructions.
PS/2 mouse
cable
USB mouse
cable
projector with lens cover
remote control batteries computer
cable
power cord
CD-ROM (not
needed to use
the projector)
A/V cable
Soft carrying case
note
You won’t need all these
components; your
configuration will determine
which ones you need.