Filter
Top Products
12
Setting Up the Projector
If you don’t need to make any other connections, you can plug in and
turn on your equipment; see page 21 for instructions.
Connecting to a PC Desktop Computer
To connect the projector to your PC desktop computer, you need to
use the computer cable. If you’ll be using the remote control as a
wireless mouse, you need to connect a mouse cable. If you’ll be using
audio through the projector’s speakers, you need to connect an audio
cable (not included with the projector).
Connecting the Computer Cables
Before you start, turn off your projector and computer.
1. Disconnect the monitor cable from the monitor port on the back
of your computer.
2. Connect one end of the computer cable to the projector’s
Computer
port.
3. Connect the other end of the computer cable to your computer’s
video (monitor) port.
4. Tighten the screws on the connectors.
If you don’t need to make any other connections, you can plug in and
turn on your equipment; see page 21 for instructions.