Filter
Top Products
38
Fine-Tuning the Projector
■
About
provides information about the current projector and
lamp settings, and lets you reset the lamp timer when you’ve
replaced the projector’s lamp.
■
Reset All
restores the factory defaults to all the projector settings.
Changing Menu Settings
You use the
Menu
,
Enter
and
Esc
buttons on the remote control to
change menu settings.
1. To display the main menu, press the
Menu
button. The menus
are displayed on the left, and the options available for the current
menu are shown on the right.
2. Press the top or bottom of the
Enter
button to scroll up or down
through the menus and view the available options.
3. Press the center of the
Enter
button to select a menu. The
highlight moves to the first menu option for that menu.
4. Press the bottom or the top of the
Enter
button to scroll through
the options. Press the right or left side of the
Enter
button to
change the setting.
If you want to go back to the default settings on any menu, select
Reset
, press
Enter
, select
Yes
, and then press
Enter
.
5. Press the
Esc
button to save your changes and go back to the
main menu.
6. Press the
Menu
button to exit the menu system.
The rest of this chapter describes the menu options.
Menu
button
Esc
button
Enter
button