Filter
Top Products
Using the Projector
29
Adjusting the Image Height
If your image is too low, you can raise it by extending the projector’s
feet.
1. Stand behind the projector. Pull up the blue foot release levers
and lift the front of the projector. This unlocks the feet.
2. Raise or lower the front of the projector as necessary.
3. Once the image is positioned where you want it, release the levers
to lock the feet into position.
4. To fine-tune the height, rotate the feet clockwise to raise the
projector and counterclockwise to lower it.
caution
To avoid damaging the lens,
do not lift the projector by the
lens.
note
If the image shape is not
square after adjusting its
position, see the next section
for a solution.
clockwise
to raise it
counterclockwise
to lower it