Filter
Top Products
Setting Up the Projector
11
Connecting the Mouse Cable
To use the remote control as a wireless mouse, you need to connect a
mouse cable: either the round PS/2 or the flat USB mouse cable.
1. Connect one end of the appropriate mouse cable to the PS/2
Mouse/Com
port or the USB Mouse port on the projector.
2. Connect the other end to your laptop’s external mouse or USB
port.
3. If necessary, configure your laptop to work with an external
mouse.
If you don’t need to make any other connections, you can plug in and
turn on your equipment; see page 21 for instructions.
Connecting the Audio Cable
If you’ll be using audio through your projector’s speakers, you need to
connect a stereo, mini-jack audio cable (not included).
1. Connect one end of the audio cable to the
Audio In
port on the
projector.
2. Connect the other end to the laptop’s headphone or audio out
jack.
note
See page 32 for instructions
on using the remote control as
a wireless mouse.
You can use the USB port for
a mouse only on systems
configured originally with
Windows
®
98 or 2000. If
you upgraded your system
from Windows 3.1 or 95, the
USB port may not work as a
mouse port.
note
If you need additional
volume (in a large
auditorium, for example),
you can also connect external
speakers or a public address
system to the projector. See
page 21 for instructions.