Filter
Top Products
40
Fine-Tuning the Projector
* Available only when Computer is selected as the input source.
** Available only when Video is selected as the input source.
***Available only when you’re projecting component video images.
Sharpness Adjusts the sharpness of the image. (If keystone correction adversely affects the
image, decrease the Sharpness setting.) Press the right or left side of the Enter button
to adjust the setting and see the results.
Gamma Adjusts the vividness of image colors.
Choose Dynamic for distinctly contrasted images, such as charts.
Choose Normal to select medium contrast.
Choose Natural to weaken contrast for more naturally colored images, such as
photographs.
Input Signal* Selects the input signal of your computer or component video equipment.
Choose RGB for computer images.
Choose YUV for component video images.
Choose YCbCr for DVD images.
Choose YPbPr for HDTV images.
Auto Setup* Set to ON to have the projector automatically optimize the computer image for
projection.
Mode** Selects the video image signal mode: Automatic or Manual. (For PAL 60 Hz mode, set
to Manual.)
Aspect
Ratio***
Selects the aspect ratio for YCbCr or YPbPr component video images.
Reset Returns all Video menu settings to their factory defaults.
Video menu
Menu item Description