Filter
Top Products
18
Setting Up the Projector
If you don’t need to make any other connections, you can plug in and
turn on your equipment; see page 21 for instructions.
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
You can connect one video source and a computer at the same time,
and easily switch between them. The projector supports HDTV,
NTSC, PAL, and SECAM formats, and automatically detects the one
you’re using.
Connecting the RCA A/V Video Cable
Before you start, make sure the projector and your VCR or other
video source are turned off.
1. Connect the yellow plug on one end of the A/V cable to the
projector’s yellow
Video
jack.
2. Connect the other yellow plug to the video-out jack on your video
source.
3. Connect the red and white plugs on the A/V cable to the
projector’s
Audio
L
(white) and
R
(red) jacks.
4. Connect the red and white plugs at the other end of the cable to
the corresponding audio output jacks on your video source.
note
You can’t use the projector
with a cable TV-style
F connector.
RCA
audio/video cable