Filter
Top Products
7. Secure the interface card in the slot with the two screws
included with the interface card.
8. Connect the proper interface cable to the interface card and
to your computer.
Also, connect other interface cables if you are using more
than one computer.
9. Make sure the printer is turned off. Then plug in the power
cord.
Before you use the optional interface, you may need to change
the settings for the interface option in the default-setting mode.
See Chapter 4.
To remove the interface card, follow the above steps in reverse
order.
The C823051 and C823071 serial interface cards
To use the C823051 or C823071 interface card, see the sections
below to set the correct baud rate, handshake timing, and error
handling.
For all other data transfer conventions, such as word structure
and communications protocol, see the C823051 or C823071
interface card manual.
Selecting the baud rate
You can select from the following baud rates: 300, 600, 1200,
2400, 4800, 9600, and 19200 bps (bits per second). To set the
baud rate, see the bit-rate selection table in the C823051 or
C823071 interface card manual.
7-4
Using Optional Interfaces