Filter
Top Products
Loading position
When you want to print more lines on a page, set this feature to
3 mm. If you set the top margin with your software, that setting
is added to the default-setting value.
Interface mode
The interface mode specifies which interface port can receive
print data.
The EPSON Stylus COLOR has a parallel interface port and
an RS-422 serial port. You can also install an optional interface
card, including an RS-232C serial interface card or an
additional parallel interface. See Chapter 7 for more
information about optional interface cards.
Note:
The RS-422 serial port is standard for the Apple Macintosh but is not
often used for PCs.
By default, interface mode is selected for automatic selection so
the printer can automatically select the interface that is
receiving data. This allows you to connect the printer to more
than one computer without having to specify the interface port.
If you wish, you can set the interface mode for a specific
interface. However, the printer will not detect print data that is
received over a different interface.
Auto interface wait mode
When you select Auto I/F mode in the Interface mode option,
you can set the interface timeout to 10 seconds or 30 seconds.
The printer does not accept data from another interface unless
it receives no data from the current interface for the period set
in I/F timeout.
4-12
The Control Panel