Epson 10000 Series Printer User Manual


 
Loading special coated and glossy paper
To load EPSON Special coated paper for 360 and 720 dpi and
the EPSON High Quality Glossy paper:
1. Make sure the printable surface of the paper is face down.
For coated paper, the printable side is whiter than the other
side. For glossy paper, the printable side is face down when
the cut corner is toward you on the right as you insert
paper in the sheet feeder.
c
Caution:
Do not touch the printable surface; hold the sheets by their
edges.
2. Insert the paper into the sheet feeder until it meets
resistance. You can insert up to 70 sheets of coated paper
and up to 50 sheets of glossy paper.
3. Select Special coated paper in the printer driver setup and
either 360 or 720 dpi resolution.
c
Caution:
Do not print on 720 dpi paper with 360 dpi resolution;
likewise, do not print on 360 dpi paper with 720 dpi
resolution.
Return unused sheets to the original packaging. Unfavorable
storage conditions, especially high temperature, humidity,
and direct sunlight, can damage the paper.
4. Adjust the left and rear edge guides so the paper feeds
straight into the paper path.
If you have paper feed or paper jam problems, see Chapter 6,
“Troubleshooting.”
When you need more special paper, see your dealer or call
EPSON Accessories at (800) 873-7766.
2-4
Choosing and Loading Paper