Filter
Top Products
16 Setting Up the Printer
2. When you see the InstallShield window, click
Yes.
After a moment, you see
this screen:
3. Click
Next and follow
the instructions on the
screen.
4. When the installation is complete, click
Finish. (If a window remains
on the screen, close it so you can see the final installation screen.)
The Remote Configuration Manager is installed on the computer in its
own folder, along with an uninstall option and the online User’s Guide,
which describes how to use the program.
To start the program, select
Programs (or All Programs) > Epson Remote
Configuration Mgr
, and then click Epson Remote Configuration
Manager
.
To open the manual, select
Programs (or All Programs) > Epson Remote
Configuration Mgr
, and then click Epson Remote Configuration
Manager User’s Guide
.
Note:
If you are using Windows 2000 or XP and the printer is connected to the parallel
port, Remote Configuration Manager may not work. In this case, do one of the
following:
❏ Before running the program, set the printer driver to the LPT2 port. Then
use Remote Configuration Manager to check or change the default settings
as desired. After you finish using the program, remember to return the
setting to LPT1.
❏ Connect the printer to the USB port instead.