Filter
Top Products
38 Using the Control Panel
2. Press the
Pitch button until the three Pitch lights indicate the desired
pitch. (The pitches available depend on which font you select.)
O = On, N = Off
Changing the Printer’s Default Settings
While you can often change the printer’s settings through your software
or printer driver, you may sometimes need to change one or more of the
printer’s default settings. There are two ways to do this:
❏ Using the Epson Remote Configuration Manager on the printer
software CD-ROM. (See page 15.)
❏ Using the printer’s control panel default-setting mode.
For instructions on using the Remote Configuration Manager, see the
online Remote Configuration Manager User’s Guide on the CD-ROM. To use
the control panel, see below. For detailed information about default
settings, see the Reference Guide. The following table shows the options
available for each printer setting.
NNO
10 cpi
NON
12 cpi
NOO
15 cpi
ONN
17 cpi
ONO
20 cpi
OOO
PS
Setting Options (default in bold)
Page length for front
tractor
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12,
14, 17
Page length for rear
tractor
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12,
14, 17
Skip over perforation Off, On
Auto tear-off Off, On
Auto line feed Off, On
Print direction Bi-D, Uni-D