Filter
Top Products
Paper Handling 29
Note:
❏ It is best to load continuous paper with labels on the pull tractor. Do not
load labels on the rear or front push tractor.
❏ Do not load continuous paper with labels from the rear paper slot. Because
the rear paper path is curved, labels may come off their backing sheets
inside the printer and cause a paper jam.
❏ Do not load paper that is curled or has been folded.
❏ Never feed labels backward using the
Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily peel off the backing sheet and cause a
paper jam.
❏ Because labels are sensitive to temperature and humidity, use them only
under normal operating conditions:
❏ Do not leave labels loaded in the printer between jobs; they may curl
around the platen and jam when you resume printing.
Removing continuous paper with labels
To prevent labels from peeling off the backing sheet and jamming the
printer, follow these steps to remove continuous paper with labels from
the printer:
1. Tear off the fresh supply of
continuous labels at the
perforation nearest the paper
entry slot.
2. Hold down the
LF/FF button to eject the remaining labels from the
printer.
c
Caution:
Never feed labels backward using the
Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily come off the backing sheet and cause a
paper jam.
Temperature
Humidity
59 to 77 °F (15 to 25 °C)
30 to 60% RH