Filter
Top Products
30 Paper Handling
Envelopes
You can feed envelopes one at a time using the paper guide, or you can
load multiple envelopes using the optional high-capacity cut-sheet
feeder (bin 1 of the double-bin cut-sheet feeder).
Before loading envelopes, set the paper-thickness lever to position 3, 4, or
6, depending on the thickness of the envelopes. See page 18 for more
information.
To load single envelopes, follow
the instructions under “Loading
Single Sheets with the Paper
Guide” on page 26. Be sure to
place the envelope printable side
down and insert the top edge of
the envelope into the printer first.
To load multiple envelopes, see
the Reference Guide.
Note:
❏ The print head must not print past the left or right edge of the envelope or
other thick paper. Make sure your application program prints entirely
within the printable area of your envelope. See “Printer Specifications” in
the Reference Guide for more information on the printable area of
envelopes.
❏ If you are using No. 6 envelopes, make sure the left edge guide is aligned
with the arrow on the paper guide.
Postcards
You can feed postcards one at a time using the paper guide, or you can
load multiple cards using the optional high-capacity cut-sheet feeder
(bin 1 of the double-bin cut-sheet feeder). The cards can be loaded only in
the front or rear paper slot.
Before loading postcards, set the paper-thickness lever to position 2 and
set the paper release lever to the single-sheet position.