Filter
Top Products
Paper Handling 31
To load a single card, follow the
instructions in “Loading Single
Sheets with the Paper Guide” on
page 26. To load multiple cards,
see the Reference Guide.
Note:
❏ When you are loading
postcards long edge first,
always load them in the top
slot.
❏ When loading A6 size cards,
always load them long edge
first.
❏ Before printing, turn on the card mode by pressing the
Tear Off/Bin
button several times until the left Tear Off/Bin light is on.
Using the Micro Adjust Function
The Micro Adjust function allows you to move the paper forward or
backward in 1/180-inch (0.141 mm) increments to adjust the tear-off and
top-of-form positions.
Adjusting the tear-off position
If your paper’s perforation is not aligned with the tear-off edge, you can
use the Micro Adjust function to move the perforation to the tear-off
position, as described below. Your tear-off position setting remains in
effect until you change it, even if you turn off the printer.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.