Filter
Top Products
24 Paper Handling
6. Insert the paper into the front or bottom paper slot as shown below
until it emerges between the platen and the ribbon guide. Then pull
up the paper until the perforation between the first and second
pages is even with the top of the printer’s ribbon.
Front slot
Before you load paper in the
front slot, remove the front
cover. Then load paper with
the printable side facing up.
Bottom slot
Load paper in the bottom
slot with the printable side
facing up.
7. Fit four holes of the paper over the tractor pins
on both sprockets. Then close the sprocket
covers.
8. Slide the right sprocket to remove any slack in the paper, then lock it
in place.
9. Slide the edge guides to the center.