Filter
Top Products
C-8
Specifications
Continuous paper
(standard and multipart): front, rear, and bottom entry
Thickness 0.22 mm (0.0087 inch)
Weight 192 g/m² (51 lb)
Width 101.6 to 254 mm (4.0 to 10.0 inches)
Length (one page) 101.6 to 558.8 mm (4.0 to 22.0 inches)
Copies 1 original + up to 4 copies
Thickness Printable area 0.065 to 0.39 mm
(0.0025 to 0.015 inch)
Perforated edges up to 0.9 mm (0.035
inch)
Weight
(not multipart)
52 to 82 g/m² (14 to 22 lb)
Weight
(one sheet of multipart)
40 to 58 g/m² (12 to 15 lb)
Binding Point glue or paper staples on both
sides (front, bottom, or rear entry)
❏
The continuous multipart forms should be securely joined
together along the left and right edges by crimping.
Crimping should be pressed in from the original sheet side
and go completely through all copy sheets.
❏
The ratio of the cut/uncut length at the perforation should
be between 3:1 and 5:1.
❏
The perforation between pages should not extend all the
way to the edges of the paper.
❏
At the perforation between pages, the horizontal and
vertical perforation cuts should not cross.
❏
The thickness of the perforation part when extended should
be 1 mm or less.