Filter
Top Products
Introduction 13
Front Section - S30675
1 Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
See “Cleaning Around the Print Head (Daily)” on page 137.
2 After heater
The heater can be used to rapidly dry ink after printing.
See “Heating & Drying” on page 114.
3 Roll core holder
Place the roll core for media take-up on these holders. There are two holders: one on the left and one on the right.
See“Loading and Exchanging Media” on page 38.
4 Tensioner media guide
The tensioner media guide prevents the take-up roll from skewing when using the auto take-up reel unit. When not using the
auto take-up reel unit, move the guide out of the way toward both edges of the tensioner.
5Tensioner
The tensioner maintains tension to prevent the media sagging as it is taken up. See “Using the Auto Take-up Reel Unit” on
page 92.
6 Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two locking
screws: one on the left and one on the right.