Filter
Top Products
Problem Solver 228
❏ Set the Media Tension value to 2 temporarily.
❏ Print and check if the print results have improved.
❏ If the problem is not resolved, raise the setting value one level.
Repeat Steps 3 and 4 until print results are improved in the range up to a setting value
of 5.
If the measures above do not resolve the problem, return the Media Tension setting to
default and continue with the next step.
On the S30675, if adjusting Media Tension does not resolve the problem, return the
Media Tension setting to default and continue with the next step.
When printing banners
Find the procedure for your printer model below and adjust the Media Tension.
S70675 or S50675
❏ Set the setting value to 2 temporarily. See “Customize Settings” on page 204.
❏ Print and check if the print results have improved.
❏ If the problem is not resolved, raise the setting value one level.
Repeat Steps 2 and 3 until print results are improved in the range up to a setting value
of 5.
If changing Media Tension does not resolve the problem, return the Media Tension
setting to default and continue with the next step.
S30675
❏ Set the setting value to 40. See “Customize Settings” on page 204.
❏ Print and check if the print results have improved.
If changing Media Tension does not resolve the problem, return the Media Tension
setting to default and continue with the next step.
5. Check that the media is loaded correctly in the auto take-up reel unit
If the method for attaching the media to the take-up roll core or the method for attaching
the counterweights is inappropriate, media may move around during take-up, which
may cause wrinkles and raised sections.