Filter
Top Products
Problem Solver 232
6. Pull the media to the cutter groove and use a cutter to remove torn or creased portions.
7. Manually rewind the cut media.
8. Remove any media that remains inside the printer.
9. Turn the printer on.
Reload the media and resume printing. See “Loading Media - S70675/S50675” on page 41
or “Loading Media - S30675” on page 65.
Other Problems
Periodical Cleaning is set to Off, but auto cleaning is performed.
Important:
If the printer is left off for an extended period, the print head will be left uncapped and dry
out, and will not print properly when printing resumes.
Turning the printer on automatically caps the print head.
o The printer performs head cleaning by the auto maintenance function to prevent the print head from being damaged due to
nozzle clogging.
Even if Periodical Cleaning is set to Off, auto maintenance is necessarily performed when the specified time lapsed after
printing.