Filter
Top Products
EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING FIP according to the printer message 125
3.3 FIP according to the printer message
3.3.1 List of Errors and Warnings
ERROR LIST RELATED TO PAPER JAM
Figure 3-3. Jammed Location
SENSOR T/R
SENSOR OHP
SENSOR REGI
SENSOR LOW PATH
CLUTCH ASSY REGI
Exit Sensor (Inside FUSER ASSY)
FUSER ASSY
DUPLEX ASSY
SENSOR UPPER PATH
SENSOR FUSER IN
2ND BTR ASSY
SOLENOID FEED
SOLENOID PICK UP
Table 3-1. List of Paper Jam Error
Panel
Message
Jammed
Location
Description See FIP
Jam LC, G
(1)
The SENSOR T/R did not turn ON within the specified
time from SOLENOID FEED - ON.
26
(p.159)
Jam MP, E
Jam D, E
(2)
The SENSOR REGI did not turn ON within the
specified time from SOLENOID PICK UP - ON.
27
(p.162)
Jam E
(3)
The SENSOR REGI did not turn ON within the
specified time from SENSOR T/R - ON.
28
(p.165)
Jam E
Jam D, E
(3)(4)
The SENSOR REGI did not turn OFF within the
specified time from CLUTCH ASSY REGI - ON.
29
(p.168)
Jam E, F
Jam D, E, F
(4)(5)
The Exit Sensor did not turn ON and SENSOR FUSER
IN turned OFF within the specified time from
CLUTCH ASSY REGI - ON.
30
(p.170)
Jam C, E, F
Jam D, E, F
(4)(5)
The Exit Sensor did not turn ON and SENSOR FUSER
IN turned ON within the specified time from CLUTCH
ASSY REGI - ON.
31
(p.174)
Check
Transparency
(3)
SENSOR OHP detected media other than OHP at the
OHP setting or detected OHP at a setting other than
OHP.
32
(p.178)
Jam E
Jam D, E
(4)
The SENSOR FUSER IN did not turn ON within the
specified time from CLUTCH ASSY REGI - ON.
33
(p.179)
Jam C
Jam D
(4)(5)(6)
Exit Sensor did not turn OFF within the specified time
from SENSOR REGI - OFF.
34
(p.182)
Jam D, E,
DM
(8)(9)(3)
SENSOR REGI did not turn ON within the specified
time from DUPLEX load signal (MCU)
35
(p.184)
Jam DM
(8)
The SENSOR LOW PATH did not turn ON within the
specified time from SENSOR UPPER PATH - ON.
36
(p.187)
Jam C
Jam D
(7)
SENSOR UPPER PATH did not turn ON within the
specified time from Exit Sensor - OFF.
37
(p.189)