Filter
Top Products
EPSON AcuLaser C1100 Revision B
DISASSEMBLY AND ASSEMBLY COVER 289
4.2.7 SWITCH ASSY FRONT
REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Unclamp the clamp fastening the harness of SWITCH ASSY FRONT and remove
the harness.
3. Remove the screw (silver, with flange, 8 mm) fastening SWITCH ASSY FRONT
to the main unit.
4. Remove SWITCH ASSY FRONT from the main unit.
5. Disconnect connector (P/J115, white) and connector (P/J125) from SWITCH
ASSY FRONT.
REINSTALLATION
1. Connect connector (P/J115, white) and connector (P/J125) to SWITCH ASSY
FRONT.
2. Match the hole on SWITCH ASSY FRONT with the boss on the main unit.
3. Fasten SWITCH ASSY FRONT to the main unit with the screw (silver, with
flange, 8 mm).
4. Fasten the harness of SWITCH ASSY FRONT with the clamp.
5. Attach COVER ASSY RH. (p.301)
Figure 4-9. Removal of SWITCH ASSY FRONT
C A U T I O N
When performing the following work, leave the intermediate
connector (white) on the harness side.
Leg_Sec03_504EC
4)
3)
5)
2)
5)
(White)
Intermediate connector
(white)