Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
53 52
3.7 Hexadecimal Dum
(1) Hexadecimal dump function
This function prints the data transmitted from the host in hexadecimal numbers and their
corresponding characters.
(2) Starting hexadecimal dumping
Turn the printer power off and set DIP switch 1-2 to on to select 40 bytes for the receive buffer
capacity. Then, turn on the power while pressing the FEED button. Before finishing the
initialization of the printer, release the FEED button, then press the FEED button again. The
printer first prints "Hexadecimal Dump" on the paper roll, and prints the data received
thereafter in hexadecimal numbers and their corresponding characters. The hexadecimal
dump is also executed with the GS ( A command.
NOTES: 1. “.” is printed if no printable character corresponds to the data received.
2. During the hexadecimal dump, all commands except DLE EOT and DLE ENQ are
disabled.
3. Insufficient print data to fill the last line can be printed by setting the printer offline.
(3) Ending hexadecimal dump
End the hexadecimal dump by turning off the power, by pressing the FEED button three
times, or by resetting the printer after printing completes.
< Example printing >
Hexadecimal Dump
To terminate hexadecimal dump,
press FEED button three times.
1B 40 1B 21 30 41 42 43 : .@.!0ABC
44 45 46 47 0A : DEFG.
*** completed ***