Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
6 7
Note: When one original and two copies (a total of three sheets) are used in an operating
environment of 34°C {93°F} and 90% humidity, the paper roll may slightly curl.
(b) Copying capability
The copying capability is affected by the ambient temperature, and is guaranteed for the
temperature ranges shown in the table below.
Number of copies Guaranteed temperature range Affected model type
Original + two copies
10° ∼ 40°C {50° ∼ 164°F}
Type D
Original + one copy
5° ∼ 50°C {41° ∼ 122°F}
Type A/B/D
1.6 Takeup Device (For Type A)
A takeup device automatically takes the paper roll up in connection with a paper feed motor.
1.7 Autocuttor (For Type A/B)
Partial cut is executed by command.
Partial cut: Cutting with one point left uncut
1.8 Printing Area
(1) Roll paper
Maximum of 200 dots, 400 positions
Figure 1.8.1 Printing Area
NOTES: 1. This dimension shows the distance from the manual cutter to the printing
position.
2. The values shown for the printing area are the values calculated (between dot
centers) according to the wire diameter (0.29 mm {0.0011”}).