Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
97 96
• Approximately (t2 × 500 ms) after the end of the paper loading wait time, the
printer enters the online state. This interval is the recovery confirmation time.
While the printer is in the recovery confirmation state, the PAPER OUT LED
flashes. In the recovery confirmation state, it is possible to re-enter the online
state by executing DLE ENQ 0, by allowing the recovery confirmation time to
elapse, or by pressing the paper FEED button.
• The paper FEED button cannot be used to feed the paper forward during the
recovery confirmation time.
• When t2 = 0 and the PAPER OUT LED is flashing, re-entering the online state is
possible by executing DLE ENQ 0 or by pressing the paper FEED button.
• If the roll paper near end sensor is mounted, and "printing stop" is enabled for the
roll paper "near end" sensor by the ESC c 4 command, the printer begins waiting
for paper to be loaded once the roll paper near end sensor and the roll paper
detector both detect paper.
• If the roll paper detector detects the "out of paper" state while the printer is
waiting for online recovery, the printer re-enters the roll paper insertion wait state.
• The printer begins waiting for paper to be loaded once the roll paper near end
sensor detects paper.
[Default] For type A: t1 = 0, t2 = 1
For type B/D: t1 = 6, t2 = 0
[Reference] DLE EOT, DLE ENQ, GS a