Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
101 100
• The d is the dot data for the characters. The amount of data defined by d is 32
bytes, which consists of 2 bytes for vertically × 16 dots.
• When the user-defined characters are defined, it is possible to redefine the
defined Kanji character codes but not to define new Kanji character codes.
• An example of the dot data for characters is shown below.
• After user-defined characters are defined, they are available until; another
definition is made; ESC @, FS ? is executed; the printer is reset; or the power is
turned off.
[Default] All spaces.
[Reference] FS ?, FS C
<Example>
d5d3d1
d4d2
d31
LSB
16dots
16dots
MSB
d32
[character
]
The dot pattern for the JIS code <7721>H is defined as shown above.
FS 2 c1 c2 d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12
Code (Hex) IC 32 77 21 00 00 38 20 20 20 20 20 24 20 24 20
d13 d14 d15 d16 d17 d18 d19 d20 d21 d22 d23 d24 d25 d26 d27 d28 d29
24 21 24 21 E4 FF 24 20 25 20 26 20 24 20 20 20 20
d30 d31 d32
20 38 20
The corresponding bit is 1 when printing and 0 when not printing.