Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
103 102
FS S n1 n2
[Name] Set left- and right-side Kanji character spacing
[Format] ASCII FS S n1 n2
Hex 1C 53 n1 n2
Decimal 28 83 n1 n2
[Range] 0 ≤ n1 ≤ 32
0 ≤ n2 ≤ 32
[Description] Sets left- and right-side Kanji character spacing n1 and n2, respectively.
[Notes]
• This command is valid only for the Japanese Kanji model, Chinese Kanji model,
and Taiwanese Kanji model.
• When double-width mode is set, the left- and right-side character spacing is twice
the normal value.
• The Kanji character spacing is set in half-dot units.
[Default] n1 = 0, n2 = 0
FS W n
[Name] Turn quadruple-size mode on/off for Kanji characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Description] Turns quadruple-size mode on or off for Kanji characters.
• When LSB of n is 0, quadruple-size mode for Kanji characters is turned off.
• When LSB of n is 1, quadruple-size mode for Kanji characters is turned on.
[Notes]
• This command is valid only for the Japanese Kanji model, Chinese Kanji model,
and Taiwanese Kanji model.
• Only the lowest bit of n is valid.
• In quadruple-size mode, the printer prints the same size characters as when
double-width and double-height modes are both turned on.
[Default] n = 0
[Reference] FS !