Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
65 64
n = 3: Error status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 Off 00 0 No mechanical error.
On 04 4 Mechanical error occurred.
3 Off 00 0 No autocutter error.
On 08 8 Autocutter error occurs.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 Unrecoverable error.
On 20 32 Recoverable error.
6 Off 00 0 Automatic recover error.
On 40 64 No automatic recover error.
7 Off 00 0 Not used. Fixed to Off.
Bit 2: If these errors occur due to paper jams or the like, it is possible to recover by
correcting the cause of the error and executing DLE ENQ 2. If an error due to a
circuit failure (e.g., wire break) occurs, it is impossible to recover.
Bit 6: If the print head temperature becomes high, bit 6 is transmitted until the print head
temperature drops sufficiently. The printer automatically recovers from this error.
n = 4: Continuous paper sensor status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2,3 Off 00 0 Paper near-end sensor. Paper adequate.
On 0C 12 Paper near-end is detected by the paper near-end
sensor.
4 On 10 16 Not used. Fixed to On
5,6 Off 00 0 Paper end sensor. Paper adequate.
On 60 96 Paper end is detected by the paper end sensor.
7 Off 00 0 Not used. Fixed to Off.
Bits 2 and 3: The "paper roll near end" detector is an option; on units that do not have this option,
bits 2 and 3 are "0" (paper adequate).
[Reference] DLE ENQ, GS a, GS r, 3.5.1, Error types, Appendix E