Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
64 63
• When Auto Status Back (ASB) is enabled using the GS a command, the status
transmitted by the DLE EOT command and the ASB status must be differentiated
by using the table in Appendix E.
• This command is effective even if the printer is not selected by set peripheral
device command, ESC =.
n = 1: Printer status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 Off 00 0 Drawer kick-out signal is LOW (connector pin 3)
On 04 4 Drawer kick-out signal is HIGH (connector pin 3)
3 Off 00 0 On-line.
On 08 8 Off-line.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 Not waiting for online recovery
On 20 32 Waiting for online recovery
6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
n = 2: Off-line status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 - - - Undefined.
3 Off 00 0 Paper is not being fed by using the paper FEED button.
On 08 8 Paper is being fed by the paper FEED button.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 No paper-end stop.
On 20 32 Printing stops due to paper end.
6 Off 00 0 No error.
On 40 64 Error occurs.
7 Off 00 0 Not used. Fixed to Off.
Bit 5: On (printing stops due to paper-end) when printing stops due to paper-end detected
by the paper-end sensor or the paper near-end enabled by using the ESC c 4.