Filter
Top Products
Confidential
EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
L
TM-U210 series
Specification
(STANDARD)
83 82
ESC c 4 n
[Name] Select paper sensor(s) to stop printing
[Format] ASCll ESC c 4 n
Hex 18 63 34 n
Decimal 27 99 52 n
[Range] 0 ≤ n ≤ 255
[Description] Selects the paper sensor(s) to use to stop printing when a paper-end is detected,
using n as follows :
Bit Off/On Hex Decima
l
Function
0 Off 00 0 Paper roll near-end sensor disabled.
On 01 1 Paper roll near-end sensor enabled.
1 Off 00 0 Paper roll near-end sensor disabled.
On 02 2 Paper roll near-end sensor enabled.
2 - - - Undefined
3 - - - Undefined
4 - - - Undefined
5 - - - Undefined
6 - - - Undefined
7 - - - Undefined
[Notes] • When a paper end is detected, printing stops after printing the current line and
feeding the paper.
• The printer goes offline after printing stops.
• The paper roll near-end sensor is an option, therefore, if the paper roll near-end
sensor is enabled by this command when the sensor is not installed, it does not
stop printing.
• The paper roll near-end sensor is enabled when either bit 0 or 1 is 1.
• The paper roll end sensor is always used to make an effective to stop printing.
[Default] n = 0