Filter
Top Products
Connecting for Remote Control
The USB Config port on the front panel enables you to connect the DSC to a computer
for configuration and firmware updating via SIS commands or the PCS software:
1. Use a USB A-to-mini-B cable to connect the DSC USB Config port to a USB port on
your computer.
USB Cable
USB Type A
USB Type Mini-B
USB 1
USB
Ports
Computer
DSC HD-HD Front Panel
Extron
DSC HD-HD
HOLD FOR XGA/720p
INPUT
OUTPUT
LPCM-2CH
MULTI-CH
HDCP AUDIO
MENU
ENTER
CONFIG
Figure 3. Connecting the DSC to the Computer
2. Power on both the computer and the DSC.
3. If this is the first time you have connected a DSC to this particular USB port on your
computer, one of the following screens may open:
• Windows XP and earlier: If the following screen is displayed, specify whether
you want the computer to connect to Windows Update in order to search the
web for the driver that it needs to communicate with the DSC via the USB port
(this is not necessary if the USB driver already exists on your computer). An
Internet connection may be required.
Figure 4. Found New Hardware Wizard Opening Screen
DSC HD-HD • Installation 6