X1(
= Verbose mode
0 = None (verbose mode and tagged responses for queries off)
1 = Verbose mode on (default)
2 = Verbose mode off, tagged responses for queries on
3 = Verbose mode on, tagged responses for queries on
NOTES:
• In verbose response mode, the device (the DSC) responds with more
information than it usually would.
For example, the DSC can send out a notice of a change in some setting
without receiving a query via your PC. That change could have been a result of
an internal process, a selection made from the front panel, or a selection made
from the OSD. This is an example of a verbose (wordy) relationship between the
controller and a connected device. Verbose mode creates more network traffic
than usual, which can slow down network performance.
• If tagged responses are enabled, all “view” commands return the command
string plus the data, the same as in responses for setting a value. For example:
Command:
E
M SSAV
}
Response: SsavM
X1!
]
(verbose mode)
or
X1!
]
(non-verbose mode)
X2)
= Unit name: A text string of up to 24 characters.
• A-Z, 0-9, and the hyphen (-) are permitted.
• The first character must be a letter.
• The last character cannot be a hyphen.
• No blank or space characters are permitted as part of the name.
• No distinction is made between uppercase and lowercase letters.
X2!
= Default name: DSC HD-HD
X2@
= Model description: Digital Scaling Converter
DSC HD-HD • Remote Configuration and Control 25