Filter
Top Products
Figure 10. Example of a Selected Submenu Option
6. Press the t or button to adjust the value in the highlighted field.
7. Press Enter to confirm the new values. Press Enter again if action confirmation is
requested. The yellow highlighting is replaced by the yellow outline on the menu.
8. Do any of the following:
• Press the or
button to move to another option on the submenu and repeat
steps 5 through 7.
• Press Menu to exit the submenu.
• Press Menu twice to exit the submenu and close the main menu.
NOTES:
• An asterisk following an item indicates that it is the default.
• The OSD times out and closes after 1 minute if no buttons are pressed.
DSC HD-HD OSD Menu System Summary
Submenu Submenu Item
Input
Film
Detect
Active
Pixels and lines
(H and V)
HDCP
Authorized
Aspect
Ratio
Input
EDID
Capture
Output
EDID
Output
Output
Resolution
Output
Format
HDCP
Notification
Audio
Mute
Advanced
Test
Pattern
Screen
Saver
-----------
Timeout
Factory Reset
Device
Info
(Read-only)
Temp
Input
(Resolution,
type, rate, total
lines, and
total pixels)
Output
(Resolution and
Rate)
Format
(Output
and aspect
ratio)
HDCP
Status
(HDMI input
and output
encryption)
Display
Info
Firmware
(Version
and build)
DSC HD-HD • Operation 13