Filter
Top Products
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Output Configuration (continued)
Video Mute (Defaults to unmuted after a power cycle.)
Mute video to black
1B
Vmt1
]
Mute video to a black screen.
Mute sync and video
2B
Vmt2
]
Mute video and sync on the
output.
Unmute video and
output sync
0B
Vmt0
]
Display the selected input.
View mute status
B
X(
]
In verbose modes 2 and 3:
Vmt
X(
]
View video mute status
X(
.
For
X(
:
0 = Off (unmuted).
1 = On (mute to black).
2 = On (mute all output sync
and video)
Screen Saver Mode (Takes place when no signal is detected on the input.)
Set screen saver mode
E
M
X1!
SSAV
}
Ssav M
X1!
]
Sets the screen saver mode to
X1!
. For
X1!
:
1 = Black screen (default).
2 = Blue screen with bouncing
OSD text.
View mode
E
M SSAV
} X1!
]
In verbose modes 2 and 3:
Ssav M
X1!
]
View current screen saver
mode
X1!
.
Set time out duration
E
T
X1)
SSAV
}
Ssav T
X1)
]
Set the time before sync
timeout to
X1)
seconds.
X1)
= 0-500 seconds.
Default = 501 seconds (never).
View timeout duration
E
T SSAV
} X1)
]
In verbose modes 2 and 3:
Ssav T
X1)
]
View amount of time
X1)
before
timeout.
HDCP Encryption Status
View input HDCP status
E
I 1 HDCP
} X^
]
In verbose modes 2 and 3:
Hdcp I 1 *
X^
]
View the encryption status
X^
for the input. For
X^
:
0 = No sink or source detected
1 = Sink or source with HDCP
detected.
2 = Sink or source detected
with no HDCP present.
View output HDCP
status
E
O 1 HDCP
} X^
]
In verbose modes 2 and 3:
Hdcp O 1 *
X^
]
View the encryption status
X^
for the output. For
X^
:
0 = No sink or source detected
1 = Sink or source with HDCP
detected.
2 = Sink or source detected
with no HDCP present.
DSC HD-HD • Remote Configuration and Control 28