Filter
Top Products
Output Submenu
This submenu allows you to configure the output of the DSC HD-HD.
Figure 12. Output Submenu
• Output Resolution — This option lets you select the resolution and refresh rate for
the connected output display. The DSC HD-HD has a range of resolutions from which
to choose (see the EDID table on the previous page for the settings that are available
for this model). The available refresh rates depend on the selected resolution.
To select a resolution:
1. Select Output Resolution from the Output submenu and press Enter.
2. Press the t or button to select a resolution.
3. Press the
or button to select a rate for the resolution.
4. When you enter a new resolution, a message appears on the display, prompting
you to press Enter to confirm your selection.
NOTE: If you do not confirm your resolution and rate selection within
15 seconds, the scaler returns to the previously selected resolution and rate.
• Output Format — This option lets you set the HDMI output format. Select Output
Format from the Output submenu, then press any of the arrow buttons to step
through the options. The choices are:
• Auto (based on the EDID of the sink) (default)
• DVI RGB 444
• HDMI RGB 444 Full
• HDMI RGB 444 Limited
• HDMI YUV 444 Full
• HDMI YUV 444 Limited
• HDMI YUV 422 Full
• HDMI YUV 422 Limited
Your selection takes effect after 3 seconds. To enable the selection immediately, press
Enter.
DSC HD-HD • Operation 16