Filter
Top Products
Device Info Screen
This read-only screen provides a quick view of certain selections, parameters, and status
information for the DSC. Some of these items are also on other DSC screens. However,
the Device Info screen provides them all on a single screen for a system overview.
Device Info
Figure 15. Device Info Screen
Changing the Output Resolution and Refresh Rate
In addition to the Output submenu (see page 16), other options are available for setting
the output resolution and refresh rate, include resetting the output rate using the front
panel button (see Resetting the Output Rate on the next page), SIS commands
(see the Output Configuration SIS commands, beginning on page 26), and the PCS
configuration program (see the help file for the program).
Custom Rates
In addition to the 42 factory output resolutions, 3 custom user-defined rates are available
for the DSC HD-HD via SIS commands (see the Output Configuration SIS commands
for the command format) or the PCS configuration program (see the program help file).
When no custom EDIDs are defined, these three resolutions and rates default to 720p @
60 Hz. The OSD dynamically updates itself based on the current file stored in the custom
EDID slot. For example, if a custom 720p EDID has been uploaded, the OSD would read
C1: 720P @ 60 Hz.
Importing an HDMI EDID
You can also import (“capture”) the EDID of a connected HDMI sink to use as a custom
rate. This EDID can be saved and stored in one of three custom EDID slots, which are
then available for custom EDID emulation or custom output rate generation (custom rate
based on the preferred timings of the EDID) (see the EDID commands on page 29).
NOTE: If an imported or custom rate is not a valid output resolution, the output
reverts to the default (720p @ 60 Hz).
DSC HD-HD • Operation 19