Filter
Top Products
DVS 510 Series • Remote Configuration and Control 66
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Resets
Erase ash memory
24
E ZFFF } Zpf ]
Clear all data from ash memory.
Reset audio settings
E ZA } Zpa ]
Reset the audio input gain and global
treble and bass settings to 0.
Reset all audio settings
E ZAAA } Zaa ]
Reset all audio settings to the factory
defaults.
Reset all settings to
factory defaults
E ZXXX } Zpx ]
Reset all settings and adjustments to the
factory default settings.
Absolute system reset
E ZQQQ } Zpq ]
Reset all settings and adjustments to
the factory defaults, the IP address to
192.168.254.254, and the subnet mask
to 255.255.0.0.
System reset retaining
IP settings
E ZY } Zpy ]
Reset all settings and adjustments to the
factory default settings except IP settings:
IP address, subnet mask, gateway IP
address, unit name, DHCP setting, and
port mapping (Telnet, web, and direct
access). This preserves communication
with the device, and is recommended
after a firmware update.